Oil Temp Sensor

Product Description:

Oil Temp Sensor
For use with an updated oil temp gauge only.*
Porsche 356, 912, 911, 914 and 930, up to 1977.
Universal type, 14 x 1.5 mm size.
For 6-24 volt systems.
300 degree F range.

*Please note: even though this sender is rated for 6 and 12 volt systems, if your gauge has not been updated to the newer type of gauge / calibration (introduced in 1975), then this sender will likely NOT WORK.  The original pre-1975 temperature sensors have been discontinued, and today's replacement senders aren't compatible with the early gauges.

Manufacturer Information:

Continental belts.  As original equipment supplier, Continental develops and manufactures timing belts, V-belts and multiple V-ribbed for all leading car makers. The OE products are also available in original-equipment quality for automotive aftermarket requirements.

Reviews and Ratings:

• 1950 Porsche 356
• 1951 Porsche 356
• 1952 Porsche 356
• 1953 Porsche 356
• 1954 Porsche 356
• 1955 Porsche 356
• 1955 Porsche 356A
• 1956 Porsche 356A
• 1957 Porsche 356A
• 1958 Porsche 356A
• 1960 Porsche 356B
• 1961 Porsche 356B
• 1962 Porsche 356B
• 1963 Porsche 356B
• 1963 Porsche 356C
• 1964 Porsche 356C
• 1964 Porsche 356SC
• 1965 Porsche 356SC
• 1965 Porsche 911
• 1967 Porsche 911
• 1968 Porsche 911
• 1969 Porsche 911
• 1970 Porsche 911
• 1972 Porsche 911
• 1973 Porsche 911
• 1974 Porsche 911
• 1975 Porsche 911
• 1976 Porsche 911
• 1977 Porsche 911
• 1965 Porsche 912
• 1966 Porsche 912
• 1967 Porsche 912
• 1968 Porsche 912
• 1969 Porsche 912
• 1976 Porsche 912E
• 1970 Porsche  914
• 1971 Porsche  914
• 1972 Porsche  914
• 1973 Porsche  914
• 1974 Porsche  914
• 1975 Porsche  914
• 1976 Porsche  914
• 1970 Porsche 914/6
• 1971 Porsche 914/6
• 1972 Porsche 914/6
• 1973 Porsche 914/6
• 1974 Porsche 914/6
• 1975 Porsche 914/6
• 1976 Porsche 914/6
• 1975 Porsche 930
• 1976 Porsche 930
• 1977 Porsche 930

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.