6 Pin CDI Set, Twin Plug

Product Description:

6 Pin CDI Set, Twin Plug
For professional installation only.
Instructions, diagrams, etc. are not available.

Set Includes:

Two New Partsklassik 6 Pin CDI Boxes
   - Our true 450 Volt digital CDI in a new, US-made aluminum case
   - Won’t lose power as RPMs increase
   - Rev limit switch with multiple settings (default setting is no limit)
   - Built-in protection from bad trigger signals & other external threats

Two CDI Ignition Coils by Partsklassik, with Brackets
   - Factory-correct transformer coils for all Porsche CDI systems

6 Pin CDI Twin Plug Wiring Harness
   - Designed for coils to be mounted on rear shock tower
   - Meticulously hand made in the USA

5K Ohm Resistors for Cap to Coil Wires
   - Essential if rotor lacks the required 5K ohms* for CDI

High quality decals are included for coils and CDI boxes.


*Replacement distributor rotors typically have insufficient resistance for Porsche CDI systems. Check your rotor’s resistance, and if it’s only 0-1 K ohms instead of the factory 5 ohms, then install the 5K resistor on your cap to coil wire. 6-Pin CDI systems also require solid core plug wires with 3k ohms resistance on each plug connector and 1K on each cap connector.  Failure to maintain these values will void this set’s warranty.  See our Technical Service Bulletin for additional information.

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. If you don't find what you're looking for, we add parts to our website upon request.

Reviews and Ratings:

• 1972 Porsche 911
• 1973 Porsche 911
• 1974 Porsche 911
• 1975 Porsche 911
• 1976 Porsche 911
• 1977 Porsche 911
• 1985 Porsche 911 Carrera
• 1986 Porsche 911 Carrera
• 1987 Porsche 911 Carrera
• 1988 Porsche 911 Carrera
• 1989 Porsche 911 Carrera
• 1978 Porsche 911SC
• 1979 Porsche 911SC
• 1980 Porsche 911SC
• 1981 Porsche 911SC
• 1982 Porsche 911SC
• 1983 Porsche 911SC

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.