Exchange Your 112 Warm up Regulator (Send Core First)

Product Description:

Exchange your Warm up Regulator 112
Send your Bosch 0.438.140.112 in for exchange or restoration.
The “112” was used on European 930 Turbo models.
Check the Bosch # on top of the WUR before ordering.
See also our digital WUR for the 930.

This is an exchange for a number-matching, rebuilt WUR. We must receive your core before we send the rebuilt unit. Exchange turnaround is usually a few business days. If we have to rebuild the one you send due to availability or other reasons, the turnaround is typically 4-6 weeks.

Our rebuilt warm up regulators and fuel distributors have been thoroughly cleaned inside and out, then rebuilt by specialized technicians. Processes and tooling are based on Bosch's original manufacturing methods. All units are bench / flow tested to ensure operation within factory specs.

After checking out, please remove any fuel line fittings and hang onto those. There is an extra charge if we have to remove them here. Drain the part of all fuel. Place it in a sealed bag or container, and pack it into a sturdy box with enough padding to prevent it from moving around inside. Write your online order number on the the outside of the box, and send it with prepaid shipping to:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533

Manufacturer Information:

Bosch
Bosch parts are available for almost all vehicle types in ex-works quality. This means that spare parts from Bosch have the same first class quality as those fitted in your car by the manufacturer. We use Bosch in preference to other brands when available.

Reviews and Ratings:

• 1983 Porsche 930
• 1984 Porsche 930
• 1985 Porsche 930

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.