Modified High Volume Engine Oil Pump 1965-70, for Exchange

Product Description:

Oil Pump Exchange
High Volume Rebuilt Oil Pump; 1965-70
Aluminum Body

Exchange your original oil pump for our rebuilt high-volume unit. Please send your matching core in first.

This rebuilt oil pump has undergone complete housing polish and throating operations that significantly increase the flow rates. Therefore, the oil system in the case will have to be modified to prevent the case from overfilling with oil. For details on the required case modification, email us or speak to the machine shop doing the case work. 

The pump housings have also been machined to close the end clearances to correct for normal wear and tear. Gears have been cleaned, media tumbled, inspected and replaced if required, then coated to improve the running life of the gear.

This pump will fit Porsche® 911 models from 1965-70.  We have seen this pump installed in 1971 models as well. Regardless of year, we must receive a like for like pump before we ship the rebuilt unit. If your pump is different from the one in the picture, please contact us first to discuss your options. 

Not all cores are rebuildable. If your pump is damaged beyond repair, it cannot be accepted for exchange. Please allow several days to 1 week for us to inspect and confirm your core. 

Please drain your pump completely and place it in a sealed container.  Pack it carefully into a sturdy box so that it cannot move around inside. Then please send to us at:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533

Manufacturer Information:

GT Series 1 has been rebuilding, porting and polishing 911 oil pumps since 1981. Their pumps have seen service in Porsches competing at virtually every road race venue in the United States, and many others worldwide. GT Series 1 pumps are used in race cars, club cars and street use cars. The advantage is 20% or greater oil flow resulting in increased oil pressure, both hot and cold.

Reviews and Ratings:

• 1965 Porsche 911
• 1967 Porsche 911
• 1968 Porsche 911
• 1969 Porsche 911
• 1970 Porsche 911
• 1971 Porsche 914/6
• 1972 Porsche 914/6
• 1973 Porsche 914/6
• 1974 Porsche 914/6
• 1975 Porsche 914/6
• 1976 Porsche 914/6

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.