Distributor Rebuild Kit, 169 Series 911E

Product Description:

911 Distributor Rebuild Kit
This kit is for the 911E with Bosch distributors in the 169 range.
One of these Bosch numbers should be found on your distributor:

0 231 169 004
0 231 169 009

This rebuild kit contains weight washers, various shims to get the up-down play to .01 to .05 of a mm, a brass top shim, new advance primary and secondary springs, new shaft pin, O-ring, fresh hardware, cap, 6500 RPM rotor, points and wicking felt. New cap hold-down clips are also available for this distributor; please see part number 901.602.965.00

This kit is meant for the professional rebuilder with skill and understanding of the distributor function. Having a distributor machine to run up the distributor before installation is a must. An improperly rebuilt distributor can damage or destroy an engine and other components. Partsklassik will not be held responsible for improper use of this product.

Distributor rebuild instructions and/or diagrams are not included with this kit. If you feel you need instructions or lack the necessary tools, please send your distributor in to us for a restoration service.

We don't offer partial kits, but we do have many individual parts for Bosch and Marelli distributors used on Porsche models.

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. If you don't find what you're looking for, we add parts to our website upon request.

Reviews and Ratings:

• 1972 Porsche 911
• 1973 Porsche 911

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.