Find Parts & Accesories for your Porsche

The requested page could not be found or no longer exists.
From time to time products will become no longer available and we will turn off the listing so as not to show you something that is not available for purchase. 
Please feel free to contact us if you have any questions..

               
Are you looking for:
Exchange Your 077 Fuel Distributor (Send Core First) Exchange your Bosch "077" Fuel Distributor 
Next exchange available mid-late Feb 2024.

Please send your matching, rebuildable core to us first.
Remove threaded fuel line fittings before sending, as photo shows.
Bosch Number is 0 438 100 077, also known as FD36X.
Check your fuel distributor to confirm the Bosch number.

Exchange your Bosch "077" for a professionally rebuilt unit. The 077 is used on Porsche 911SC models produced from 8/79 thru 8/83. This is an exchange service and we must receive your number-matching, rebuildable core before shipping a rebuilt part. Our fuel distributors have been rebuilt by skilled technicians using equipment and processes like the ones originally used by Bosch. All rebuilt units are bench / flow tested before shipment.

We don’t sell rebuild kits for fuel distributors, because most individuals and shops lack the equipment and process knowledge to perform this specialized job.

Rebuilt fuel distributors carry a 1 year repair warranty from time of purchase. Warranty is voided if you do not properly clean your fuel system before install.

Shipping Instructions:
Please remove all hose/line fittings and hang on to them, because the rebuilt unit does not include fittings. There is an extra charge if we have to remove them here. Drain your part of all fuel. Place the part in a sealed container and pack the sealed part carefully into a sturdy box, ensuring that the part cannot move around inside the box. Write your order number on outside of box and send postage-paid to:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533


Programmable Distributor, 0.231.169.001 for 911 ‘L’

New Programmable 123 Ignition Distributor
Delivered pre-programmed for a 1968 Porsche 911L.
WARNING:  Not programmed for modified engines.
Professional installation is recommended.

Run a new distributor on your classic Porsche!  This distributor has the design character of the original, but with modern electronics. The 123 distributors have been around for over a decade, but they were challenging to set up properly for the 911. Until now!

Comes pre-loaded with our exclusive programming for your stock engine. Our programs for each year and sub-model were developed and tested by a Porsche-trained mechanic, engine builder, and ignition specialist with 34 years of experience. 

This distributor is pre-programmed to replace the Bosch model 0.231.169.001, which featured vacuum retard and was factory equipment on the 911L in 1968. Please note that any changes to the stock programming are made at your own risk.

For modified 911 engines, a qualified, insured mechanic should be employed to adjust the programming to the engine. Incorrect setup or installation can result in severe damage to the engine and distributor.

When properly re-programmed, this distributor can also be set up for other 2.0L / 2.2L engines on the 911 up to 1971. An Apple or Android App allows for wireless adjustment of the ignition curve and provides an electronic dashboard. Range is 500-8K engine RPM.  Other key features include rev-counter, anti-theft PIN code, real time tuning, vacuum advance, and soft rev limiter.

As with all electrical products, this item is non-returnable except for manufacturer pre-approved warranty returns. Arrangements for repairs or warranty service must be made directly with the manufacturer.


Blaupunkt radio installation kit for Porsche G-model Blaupunkt Radio Installation Kit for Porsche G-models
For installing a radio in Porsche 911 or 930 models, 1974 - 83.
Sold as a kit.

3 Pin CDI Wiring Harness, Early for Pertronix or 123 Three Pin CDI Wiring Harness for Pertonix / 123
In stock and ready to ship.

This is designed to replace your aging and cracked wiring harness that connects the three pin CDI box to the ignition coil and ignition distributor.  For Porsche 911 models up to 1974 where the tach drive comes from the ignition Distributor.

Designed for use with the Petronix Ignitor or 123 Ignition Distributor in mind, this harness allows for a cleaner connection of the Pertronix/123 wires at the distributor without having to drag another wire across the engine compartment to pick up an ignition power supply.

Includes free download of our CDI System TSB.

Please note:
Our harnesses are intended for installation by experienced professional mechanics who are familiar with Porsche CDI systems and safe shop practices, and who have access to Porsche factory manuals and/or applicable ignition wiring diagrams. Installation instructions are not included.  

Front Suspension Protection Plate Front Suspension Protection Plate,
Bolts in the front of the A-arm assembly to protect the front of the arm from scraping the ground when entering driveways.
Will Fit 1968-77 Models