Find Parts & Accesories for your Porsche
Restoration Service for Your Ignition Distributor, 2.4L 911E

Restoration Service for Your Ignition Distributor, 2.4L 911E

Rating(s) starstarstarstarstar (0)
Availability: In Stock
Our Price: $615.00
Please start by selecting your Vehicle above. If you know our part number please select from options below.


Product Description:

Restoration Service for YOUR Bosch® 911E Ignition Distributor
Send your Bosch distributor to us for restoration.

On the 1972-73 Porsche 911E 2.4L cars, Porsche used 3 different distributors.  They are the Bosch models 0231.169.004, 0231.169.009, and 0231.184.002. All are functionally interchangeable. 

When you send us your distributor, it will be completely disassembled, media blasted, and polished. All new bushings, sliding surface, and shim kit are installed along with a new spring package. This restoration also includes a new cap, 6500 rpm limiting rotor, points, condenser, and shaft seal. Your distributor is then tested on our Sun distributor tester, so the unit arrives ready to install and set timing. Test results / curves are included with the distributor. We also include a free download of our TSB for Porsche CDI ignition systems.

If you would also like new hold down clips for the cap, we have them available - part number 901.602.965.00.  We also carry the clockwise drive gear if you would like us to replace yours.

Please note: the vacuum can is not included in the restoration. Not all distributor cores are rebuildable. Damaged distributor cores may require machining and/or parts that are not included in the price of this service; if that is the case we will contact you.

This is a thorough restoration and we will need your distributor for, on average, 4-5 weeks to perform this work. Turnaround time varies with the condition of all components and shop workload.

Please pack your distributor carefully to avoid damage, write your online order number on the outside of the box, and send to:

827 State Route 82
Suite 10251
Hopewell Junction, NY 12533

Manufacturer Information:

Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. If you don't find what you're looking for, we add parts to our website upon request.

Reviews and Ratings:

0 Customer Review(s)
5 Star
0  (0%)
4 Star
0  (0%)
3 Star
0  (0%)
2 Star
0  (0%)
1 Star
0  (0%)
Please login first to write a review.


  • 1972 Porsche 911
  • 1973 Porsche 911
[All vehicle fits]

Return Policy

Please inspect your order as soon as you Receive it. You must notify us within 5 days of receiving the order of any missing or wrong parts.

If your package is damaged in any way, you must notify the shipper (FedEx, Post Office, etc.) as soon as possible to report the damage.

All returns are subject to a 25% restocking fee, with the exception of pre-approved warranty returns, or if we ship a different part number than ordered. There will be no returns after 30 days of purchase. Non-warranty returns will not be accepted if the parts have been installed, damaged, misused, or are not sellable as new parts. Special order parts are not returnable except for pre-approved warranty.  Parts sent to us in paper envelopes will not be refunded.

You must obtain an RMA number from us before returning your item. You must obtain the RMA by phone. Requests for an RMA number via Email will not be answered, as we cannot guarantee that any email will reach its intended recipient  All returns must be shipped freight prepaid, orders shipped freight collect will be refused.