Find Parts & Accesories for your Porsche
 

Porsche Steering & Suspension
 
Whether a handling or tire wear condition exists, or the suspension has been removed for restoration, we have the factory tooling to test and confirm your vehicles suspension components are in good usable condition or whether they will need to be replaced. We offer the following component services;
 
Rear Trailing Arms, 1969-89 model
 • Arms are received and inspected for impact damage and or cracks
• The rear parking brake and wheel bearings are removed
• The Arm is mounted on the trailing arm jig (P295B) and checked for serviceability
• If the arm is straight the arm is cleaned, (and painted for steel arms)
• New trailing arm bushings and wheel bearings are installed
• The parking brake assembly is overhauled and installed
 
Front A-arms
 • A-arms are received and inspected for impact damage or cracks
• Ball joints are removed and the arms are checked for serviceability using P288B
• A-arm bushings are inspected for wear*, (see note at the bottom of page)
• Clean and paint A-arms
• Install new Ball joints
 
Steering Rack
 • Inspect steering rack for damaged housings or mounting hardware
• Disassemble rack and inspect components and repair and replace as required
• Reassemble rack and set pre-loads
• Install the rack on special tool P285 and install new inner tie rods and torque
 
Struts
 • Inspect struts for signs of impact damage
• Install special tool P286B and check the stub axle condition
• Install special tool P284B and check steering arm location
• If all checks out struts are cleaned and painted to original color
• Install and torque to specification a new strut cartridge
 
*From 1969 on the front a-arm bushings were vulcanized on to the arm at the factory, there are aftermarket polyurethane bushings available for these arms however we have found that the replacement bushings to be noisy and inconsistent in the way that they fit.We do however have a factory style replacement bushing available, however it will require access to a press to install them. We have found these factory style replacement to work well and will restore the suspension to the original condition.

Please call us at +1 (928) 255-2824, or email us at info@partsklassik.com or fill out our quick contact form if you have any questions regarding your Porsche steering and suspension systems.