Find Parts & Accesories for your Porsche

The requested page could not be found or no longer exists.
From time to time products will become no longer available and we will turn off the listing so as not to show you something that is not available for purchase. 
Please feel free to contact us if you have any questions..

               
Are you looking for:
Restoration of Your Ignition Distributor, Bosch “061” Restoration Service for YOUR Bosch® 061 Ignition Distributor
Send your distributor to us for restoration.
No time? See our new distributor option elsewhere on this page.

Your distributor will be completely disassembled, cleaned and inspected. The restoration includes a new cap, rotor, points, shaft seal, shims, bushings, hardware and more. Our custom wound advance springs allow us to duplicate the factory advance curve. The rebuilt unit is tested and graphed on a Sun distributor machine.

The vacuum can is not included in this service. If your vacuum can is not functioning, we will contact you to discuss your options. Not all cores are rebuildable. Damaged cores may require additional machining and/or parts not included in this service; if this is the case we will contact you.

We'll need your distributor for about 4-5 weeks to complete the work. (No time to wait? See "Related Products" on this page for a brand new distributor with our exclusive Bosch 061 programming.)
 
Please send your distributor, well packed and with order number on the outside of the box, to:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533

Exchange Your 090 Warm Up Regulator (Send Core First) For Exchange: Rebuilt Bosch Warm Up Regulator
Next exchange available mid to late February 2024

Send us your matching core first, and we'll ship you a rebuilt unit.
Remove threaded fuel line fittings prior to shipping, as photo shows.
For Porsche 911SC USA models from 1981-83 using Lamba controls.
Check your WUR to confirm the Bosch number 0 438 140 090

This listing is for an exchange. Send us your rebuildable, numbers matching core first, and we will then send you a rebuilt unit. (We do not sell our WUR cores, nor do we ship without receiving a core first). Please note that not all cores are rebuildable. If you don’t have a good core to trade, see our new digital WUR.

Our warm up regulators are professionally rebuilt using specialized equipment and techniques based on the original Bosch manufacturing process. All units are fully disassembled and cleaned thoroughly inside and out. Components are then rebuilt by skilled technicians and bench / flow tested.

We do not sell rebuild kits for these CIS components due to the skills, knowledge, and equipment required to restore them properly.

Includes a 24 month repair-only warranty. You must clean out your fuel system prior to installation, or repairs will not be covered. Please be sure you are using the correct warm up regulator and fuel distributor part numbers on your vehicle.

Shipping Instructions:
After checking out, remove any fuel line fittings from your WUR and hang on to those. There is an extra charge if we have to remove them here. Drain the part of all fuel, and place it in a sealed bag or container. Then wrap the part carefully to avoid damage, pack it into a sturdy box, and send it postage pre-paid to the address below. Please write your online order number on the outside of the box.

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533


Exchange Your 089 Warm up Regulator (Send Core First) Exchange Your Warm up Regulator, Bosch 089
Send your WUR in to us for exchange.
Remove threaded fuel line fittings first, as photo shows.
Bosch part number 0 438 140 089
For Porsche 1980-83 911SC models without lamba control.

We must receive your rebuildable, numbers matching core first, and we will then send you a rebuilt unit. Please contact us in advance for availability. We also have digital 911 warm up regulators available with no core required.

Our Bosch warm up regulators and fuel distributors are professionally rebuilt using specialized equipment and techniques based on the original Bosch manufacturing process. All units are fully disassembled and cleaned thoroughly inside and out. Components are then rebuilt by skilled technicians and bench / flow tested. 

Includes a 24 month repair-only warranty. You must clean out your fuel system prior to installation, or repairs will not be covered. Please be sure you are using the correct warm up regulator and fuel distributor part numbers on your vehicle. CIS injection system issues are often a result of using incorrect components for the given year/model. 

Shipping Instructions:
After checking out, please remove any line fittings from your WUR and hang on to those. There is an extra charge if we have to remove them here. Drain the part of all fuel, and place it in a sealed bag or container. Then wrap the part carefully to avoid damage, pack it into a sturdy box, and send it postage pre-paid to the address below. Please write your online order number on the outside of the box. Ship to:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533

Exchange Your 017 Warm Up Regulator (Send Core First) Exchange Your Warm Up Regulator, Bosch 017
Send your unit in for exchange or rebuild.
Remove threaded fuel line fittings first, as shown in photo.
Bosch # 0 438 140 017 is used on the 1976-77 Porsche 3.0L Carrera
.

This listing is for an exchange in which you send us your rebuildable, numbers matching core first, and we will then send you a rebuilt unit. We do not sell our WUR cores, nor do we ship rebuilt units without receiving a core first. We usually have rebuilt 017 regulators in stock, but if not, we will rebuild your core. Please contact us in advance for availability.

If you don’t have a good core to trade, see our new digital WUR for the 911.

Our warm up regulators and fuel distributors are thoroughly cleaned inside and out, then rebuilt by trained technicians. Processes and tooling are based on Bosch's original manufacturing methods. All units are bench / flow tested to ensure operation is within factory specs. 

After checking out, please remove any line fittings from your WUR and hang on to those. There is an extra charge if we have to remove them here. Drain the part of all fuel, and place it in a sealed bag or container. Then wrap the part carefully to avoid damage, and send it postage pre-paid to the address below. Please write your online order number on the outside of the box.

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533


Exchange Your 129 Warm Up Regulator (Send Core First) Exchange Your Warm Up Regulator, Bosch 129
Send your unit in for exchange or rebuild service.
Remove threaded fuel line fittings before shipping, as photo shows.
Contact us in advance for exchange availability.
Bosch # 0 438 140 129 is used on the Porsche 911 from 1973-75.

This is an exchange. Our warm up regulators and fuel distributors are professionally rebuilt using specialized equipment and techniques based on the original Bosch manufacturing process. All units are fully disassembled and cleaned thoroughly inside and out. Components are then rebuilt by skilled technicians and bench / flow tested.

We must receive your rebuildable, numbers matching core first, and we will then send you a rebuilt unit. We do not sell cores, but we do have new digital warm up regulators available if you have no core.

We usually have rebuilt 129 regulators in stock, but if not, we will rebuild yours. A rebuild takes 4-8 weeks depending on workload / backlog.

Includes a 24 month repair-only warranty. You must clean out your fuel system prior to installation, or repairs will not be covered. Please be sure you are using the correct warm up regulator and fuel distributor part numbers on your vehicle. CIS injection system issues are often a result of using incorrect components for the given year/model.


Shipping Instructions:
After checking out, please remove any fuel line fittings from your WUR and hang on to those. There is an extra charge if we have to remove them here. Drain the part of all fuel, and place it in a sealed bag or container. Then wrap the part carefully to avoid damage, pack it into a sturdy box, and send it postage pre-paid to the address below. Please write your online order number on the outside of the box. Ship to:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533