CDI Box 6 Pin, Retrofitted, Outright Sale

Product Description:

6 Pin CDI Box Retrofit, OUTRIGHT SALE
Our digital electronic CDI inside an original Bosch case.
No cores required or accepted. This is an outright sale.
Includes free download of our CDI System TSB.
For 1978-83 Porsche 911SC, and 1978-94 Porsche 930.

This is an original Bosch CDI case updated with our latest CDI electronics package. The casing of this CDI box is used and isn’t media blasted. Expect to see a patina, blemishes, signs of age and wear, etc. If you're not comfortable with this, see our "CDI Box 6 Pin New", which has a new Partsklassik case.  If you have an original Bosch unit to trade in, see our "CDI Box 6 Pin, Refurbished Exchange."

With the Porsche models that use CDI now as old as 50+ years, many issues are negatively impacting these systems today. Some cars have been fitted with replacement parts that don’t conform to factory standards, and Bosch has discontinued many original parts. Factory specs, knowledge, and diagnosis skills have been forgotten and abandoned. General wear and tear takes its toll over the years. All of these factors contribute to system failures.

Advantages of the Partsklassik CDI:

• “A” Terminal Disconnect protection
• Protected Trigger Signal Input Filter
• Input Voltage Correction
• End User Settable RPM Limiter
• Misfire Over Voltage Protection
• True 450 Volt Primary CDI
• Highly Efficient Design Resulting in Less Heat Generation
• Low System Current Draw
• Won’t Lose Power as RPM Increases
• Plug compatible with all factory Porsche Models
• No Phase Modification on Trigger/Firing Point
• 2 Year Warranty Against Defects in Materials and Assembly

Each CDI box we rebuild is fully tested on our proprietary testing equipment before it leaves our facility. There are however a number of installation factors, vehicle conditions, and practices that can make a CDI box appear non-functional, or that can actually damage the unit during or after installation. For this reason, we recommend that any CDI box be installed by a qualified Porsche mechanic who is truly competent with Porsche CDI ignition systems.

We stand behind our CDI boxes with a 2-year repair / replace warranty on defects in materials and assembly only. You are responsible for avoiding practices and vehicle conditions that damage CDI boxes. Our TSB goes into detail on CDI do’s and don’ts, and the TSB is included with your purchase. To avoid voiding your warranty, read the TSB before installation.

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. If you don't find what you're looking for, we add parts to our website upon request.

Reviews and Ratings:

• 1978 Porsche 911SC
• 1979 Porsche 911SC
• 1980 Porsche 911SC
• 1981 Porsche 911SC
• 1982 Porsche 911SC
• 1983 Porsche 911SC
• 1978 Porsche 930
• 1979 Porsche 930
• 1980 Porsche 930
• 1981 Porsche 930
• 1982 Porsche 930
• 1983 Porsche 930
• 1984 Porsche 930
• 1985 Porsche 930
• 1986 Porsche 930
• 1987 Porsche 930
• 1988 Porsche 930
• 1989 Porsche 930
• 1989 Porsche 962

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.