Distributor Rebuild Kit 911 Cast Iron 001

Product Description:

Distributor Rebuild Kit for Early 911
For the Bosch 0 231 159 001 black label ignition distributor.
Used on the Porsche 911 normal or T models up to 1968.

This kit includes advance springs, bushings, shims, insulators, hardware, o-ring, cap, builder's plate with rivets, rotor, points, and condenser. We also have new cap clips available; see part number 901.602.965.00.

This kit is for professional use and does not include instructions on how to rebuild a distributor. By purchasing this kit you ascertain that you, the installer have the equipment and the knowledge to correctly install these parts. Partsklassik will not be held responsible for any damages arising from the use of this kit. It is up to the installer to ascertain if this kit is right for your application.

If you do not have the correct equipment or the experience required to install this kit, ask us to restore your distributor for you, or take it to a trusted mechanic with the knowledge and correct equipment to install and adjust these parts.

We do not offer partial kits, but we do have many individual parts for Bosch and Marelli distributors used on Porsche models.

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. If you don't find what you're looking for, we add parts to our website upon request.

Reviews and Ratings:

• 1965 Porsche 911
• 1967 Porsche 911
• 1968 Porsche 911

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.