Find Parts & Accesories for your Porsche

The requested page could not be found or no longer exists.
From time to time products will become no longer available and we will turn off the listing so as not to show you something that is not available for purchase. 
Please feel free to contact us if you have any questions..

               
Are you looking for:
Vacuum Advance Unit, Single for 911 SC Distributor Vacuum Advance/Retard Module
Replacement vacuum advance unit for your distributor.
Made in USA by Rauch & Spiegel. Single pull vacuum can.
For 911SC models 1978-79 and Euro distributors 1979-83.
*NOT* for 1980-83 USA model 911SC, which need double pull cans.

Use with Bosch distributor numbers:
0237 306 001
0237 301 007
0237 301 009

Brake Cylinder Rebuild kit, Seals Only Brake Cylinder Rebuild kit, Seals Only
Brake Cylinder Rebuild kit, with seals only, NO PISTONS. 
One kit required per wheel, front and rear.
For all 356 models 1948-63 that use drum brakes.

Brake line, Wheel Cylinder to Cylinder Brake line, Wheel Cylinder to Cylinder, Front
Special Order. Contact us to order.

Connects the front brake wheel cylinders.
For 1948-63 Porsche 356, 356A, 356B using drum brakes.
Sold per each, 2 required per vehicle.

Hose Nipple M26 90° Tube to 18mm Hose 90° Tube M26 x 1.5mm Swivel Nut to 18mm Hose
This fitting has an m26 swivel nut on a 90 degree bend tube.
Has barbed end for a hose with 18mm inside dimension.
Use a ferrule or a hose clamp at the barbed end. 
Used in the oil systems to connect supply lines to engine oil coolers or oil tank.

Sold per each.
Hose Nipple M30 90° Tube to 22mm Hose 90° Tube M30 x 1.5mm Swivel Nut to 22mm Hose
Currently on back-order.  Expected back in stock early to mid June 2021.

This fitting has an m30 swivel nut on a 90 degree bended tube.
Has with a barbed end for a 22 mm inside dimension hose.
You can use a ferrule or hose clamp at the barbed end.
Used in the oil systems to connect supply lines to engine oil coolers or oil tank.

Sold per each.