Find Parts & Accesories for your Porsche

The requested page could not be found or no longer exists.
From time to time products will become no longer available and we will turn off the listing so as not to show you something that is not available for purchase. 
Please feel free to contact us if you have any questions..

               
Are you looking for:
Restoration of Your Ignition Distributor, 911SC Euro Restoration Service for YOUR Bosch Distributor
Send your Bosch 0.237.301.009 distributor to us for restoration.
No time? See "Related Products" on this page for new distributor option.

When you send us your Bosch 0.237.301.009 ignition distributor, it will be completely disassembled, media blasted, and polished. All new bushings and shims are installed, along with new springs. The restoration also includes new cap, rotor, seals, hardware, and gear pin.

We make all necessary adjustments to get your distributor operating within factory specs and tolerances. Your rebuilt distributor is then tested on a Sun distributor machine, and the printed results are provided to you.

If you would like new cap hold-down clips for your restored distributor, please see part number 930.602.965.00. We also have new drive gears and impulse generator windings if you would like those replaced.

Please Note: this service does not include the vacuum can. If your ignition distributor vacuum can is not re-usable then we will have to contact you for options. Not all cores are rebuildable. Damaged cores may require machining and/or parts not included with this service; if that is the case we will contact you.

This is a thorough restoration and we will need your distributor for approximately 4-5 weeks to complete the work. Turnaround times will vary with shop workload and condition of all components.  

Please send your well packed distributor, with your online order number on the the outside of the box, to:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533

 


Exchange Your 010 Fuel Distributor (Send Core First) Exchange your Bosch "010" Fuel Distributor
Please send us your matching, rebuildable core to us first.
Remove threaded fuel line fittings, as shown in photo.
Our rebuilt units are available on an exchange basis only.
Please contact us to confirm stock of this model.

Bosch fuel distributor model 0 438 100 010 is used on 1976-77 3.0L Carrera models. Check the builder's plate on your fuel distributor to confirm the Bosch model number. We must receive your core first, and typical turnaround time is 2 weeks.

Our Fuel Distributors are rebuilt by professional, skilled technicians with processes and equipment similar to what Bosch originally used. All rebuilt units are flow tested before shipment. Rebuilt units carry a two year repair warranty. This warranty requires that your fuel system be properly cleaned before installation.

When sending your core in, please remove the hose/line fittings and hang on to those. There is an extra charge if we have to remove them. Drain your part of all fuel, and place it in a sealed bag or container. Then carefully pack into a sturdy box and ensure the part cannot move around inside the box. Write your order number on the outside of the box and ship pre-paid freight to: 

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533


Exchange Your 037 Fuel Distributor (Send Core First) Exchange your Bosch "037" Fuel Distributor
Next available exchange ~ late June / early July 2024.
Contact us for updated availability status.

Please send your matching, rebuildable core to us first.
Remove threaded fuel line fittings, as shown in photo.

This is an exchange service for the Bosch 0 438 100 037 fuel distributor. It is used on Porsche 930 models 1975-79 USA, and up to 1985 Euro models. Check the builder's plate on your existing fuel distributor to confirm the Bosch number. Please inquire about current availability. If we don't have one ready for exchange, we'll rebuild yours.

Our rebuilt fuel distributors are cleaned inside and out, and rebuilt by experienced, specialized technicians. Processes and tooling are based on the ones originally used by Bosch. All rebuilt units are bench / flow tested to ensure they are operating within factory specs. We don’t sell rebuild kits for fuel distributors, because most individuals and shops lack the equipment and process knowledge to perform this specialized job.

Rebuilt fuel distributors have a 2 Year Repair Warranty. This Warranty is voided if you do not properly clean your fuel system before install.

Shipping Instructions:
Please remove all hose/line fittings and hang on to those. There is an additional charge if we have to remove them here. Drain the part of all fuel and place it into sealed bag or container. Carefully pack the sealed part into a sturdy box. Ensure the part cannot move around inside the box. Write your order number on the outside of the box and send postage pre-paid to:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533


Exchange Your 145 Fuel Distributor (Send Core First) Exchange your Bosch "145" for a Rebuilt Unit
Please send your matching, rebuildable core to us first.
Remove and save threaded fuel line fittings before shipping.
Check your distributor's builder's plate to confirm the Bosch number.
Exchange turnaround on this model is 1-2 weeks.

Exchange your Bosch 0 438 100 145 core for a rebuilt unit that is ready to install. The "145" Bosch model is for 1986-94 Porsche 930 cars using the Lambda control system. 

Our fuel distributors are rebuilt by skilled technicians using tooling and processes based on the original Bosch manufacturing methods. All rebuilt units are bench / flow tested to ensure they are operating within factory specifications. We don’t sell rebuild kits for fuel distributors, because most individuals and shops lack the equipment and process knowledge to perform this specialized job.

Comes with 24-month repair-only warranty. You must clean your fuel system prior to install to receive warranty coverage.

This part is sold on an exchange basis and we must receive your rebuildable, matching core before we ship this rebuilt unit to you. Exchange turnaround time on this particular model is usually 1-2 weeks.

Shipping Instructions:
Please remove all fuel hose/line fittings from your fuel distributor and hang onto those. There is an extra charge if we have to remove them here. Drain the part of all fuel, and place it in a sealed bag or container. Pack the sealed part into a sturdy box and ensure the part cannot move around inside the box. Write your order number on outside of box and ship postage pre-paid to:  

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY  12533

Oil Hose, Engine Oil Tank to Separator, Turbo Models Oil Hose, Engine Oil Tank to Oil separator, Turbo Models only
Connects the engine oil tank to the oil separator can. 
For 1984-86 Porsche 930 Turbo models only.
Note: Special Order Part, pre-approved warranty returns only.
Usually ships in 4-8 days.