Distributor Sliding Surface

Product Description:

Distributor Sliding Surface
These are a must to make your cast iron distributor function correctly. They are made from the correct thickness and grade of phenolic material like the original plates. They will not curl up around the weights like the Teflon plates do, and they will withstand the engine heat.

For Bosch® ignition distributors on Porsche models, including the VE 383, BR9, BR18, 022, and the 159/169 series. Some trimming may be required on the later distributor models.

Sold per each.

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. If you don't find what you're looking for, we add parts to our website upon request.

Reviews and Ratings:

1 Customer Review(s)

5 Star

1  (100%)

4 Star

0  (0%)

3 Star

0  (0%)

2 Star

0  (0%)

1 Star

0  (0%)

Please login first to write a review.

Overall

Value

Performance

I bought some of the first of these factory quality replacement sliding surfaces, as soon as Kurt offered them. He sold the first ones, at a Hershey event, and I caught him as he drove home, to make the purchase. I had just built 2 912 distributors, for 912 BBS members, using the then Teflon parts, and had one fail before I got it off the dist. Machine. I replaced the part with these new offerings, and that 022 Bosch unit has been in service since, in a '67 912, now, in its 2nd engine, and doing well. These are all I've used since, Thanks, Kurt, a job well done! Mike (TX)

Reviewed by Michael  H

10/26/2017 3:38:30 AM

• 1950 Porsche 356
• 1951 Porsche 356
• 1952 Porsche 356
• 1953 Porsche 356
• 1954 Porsche 356
• 1955 Porsche 356
• 1955 Porsche 356A
• 1956 Porsche 356A
• 1957 Porsche 356A
• 1958 Porsche 356A
• 1960 Porsche 356B
• 1961 Porsche 356B
• 1962 Porsche 356B
• 1963 Porsche 356B
• 1963 Porsche 356C
• 1964 Porsche 356C
• 1964 Porsche 356SC
• 1965 Porsche 356SC
• 1965 Porsche 911
• 1967 Porsche 911
• 1968 Porsche 911
• 1965 Porsche 912
• 1966 Porsche 912
• 1967 Porsche 912
• 1968 Porsche 912
• 1969 Porsche 912

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.